Prodcution:PTFE, rods, tubes, plates, film, PTFE, seals, rubber products, Piston Ring, ring support, the Pan-gen fluoride plastics, engineering plastics.
Has passed ISO9002 quality system authentication in 1999!



1、FeatureThere are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram ectruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured by moulding.

PTEE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from -180≧~ +260≧ under no burthen circumstances.PTEE has the lowest coefficient of friction of all known solid materials.

2、Types and Specification

TYPES Diameter(mm) length(mm)
pressed rod 2~4 produced under requirements
extruded rod 5~120 500~3000
die pressed rod 10~300 100~300

3、Main propertis:

Propertis unit Result
Apparent density g/cm3 2.10~2.30
Tensile strength(min)− MPa 14.0
Crack elongation(min)− % 140

Note:When the diameter of rod is larger than 16mm,only test apparent density.

Electrical insulation,seal-sticking materials.

Print― ーBack―ーTop
Add Yongsheng Industrial Park, Baqiao Town, Yangzhong City, Jiangsu Province( P.C.:212217 )
Tel:+86-511-8851 6510  Fax:+86-511-8851 5840